diff --git a/.automation/README.md b/.automation/README.md
index 812c2aae..485e97ec 100644
--- a/.automation/README.md
+++ b/.automation/README.md
@@ -19,4 +19,5 @@ When the script is triggered in a branch, it will push with the tag:**NameOfBran
 - **Note:** The branch name will be reduced to alphanumeric for consistency and uploading
 
 ## test
+
 This folder holds all **Test Cases** to help run the *CI/CT/CD* process for the **Super-Linter**.
diff --git a/.automation/cleanup-docker.sh b/.automation/cleanup-docker.sh
index 131daf6a..838119c4 100755
--- a/.automation/cleanup-docker.sh
+++ b/.automation/cleanup-docker.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 ################################################################################
 ############# Cleanup Image on DockerHub @admiralawkbar ########################
@@ -8,7 +8,7 @@
 # Its based on being built from a GitHub Action, but could be easily updated
 # To be ran in a different medium.
 #
-# PRE-Reqs:
+# PRE-Requirements:
 # - Dockerfile
 # - System with Docker installed
 # - Global variables met
diff --git a/.automation/test/ansible/ghe-initialize/templates/ghe-config-apply.sh b/.automation/test/ansible/ghe-initialize/templates/ghe-config-apply.sh
index 06e2e712..5a0f32dd 100644
--- a/.automation/test/ansible/ghe-initialize/templates/ghe-config-apply.sh
+++ b/.automation/test/ansible/ghe-initialize/templates/ghe-config-apply.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 ################################################################################
 # Script to run ghe-config-apply on the primary GHES instance
@@ -35,7 +35,7 @@ CheckGHEPid()
     ################################################
     if [ ! -f "$GHE_CONFIG_PID" ]; then
       # File not found
-      echo "Were good to move forward, no .pid file found at:[$GHE_CONFIG_PID]"
+      echo "We're good to move forward, no .pid file found at:[$GHE_CONFIG_PID]"
     else
       # Found the pid running, need to sleep
       echo "Current PID found, sleeping $SLEEP_SECONDS seconds before next check..."
@@ -189,10 +189,10 @@ CheckGHEProcess
 ####################
 RunConfigApply
 
-##########################################
-# Were going to run it again after a nap #
-# to make sure there is no crazy actions #
-##########################################
+###########################################
+# We're going to run it again after a nap #
+# to make sure there is no crazy actions  #
+###########################################
 sleep 300s
 
 ######################
diff --git a/.automation/test/clojure/README.md b/.automation/test/clojure/README.md
new file mode 100644
index 00000000..6606ef5b
--- /dev/null
+++ b/.automation/test/clojure/README.md
@@ -0,0 +1,13 @@
+# Clojure Test Cases
+This folder holds the test cases for **Clojure**.  
+
+## Additional Docs
+No Additional information is needed for this test case.
+
+## Good Test Cases
+The test cases denoted: `LANGUAGE_good_FILE.EXTENSION` are all valid, and should pass successfully when linted.
+- **Note:** They are linted utilizing the default linter rules.
+
+## Bad Test Cases
+The test cases denoted: `LANGUAGE_bad_FILE.EXTENSION` are **NOT** valid, and should trigger errors when linted.
+- **Note:** They are linted utilizing the default linter rules.
diff --git a/.automation/test/clojure/clojure_bad_1.clj b/.automation/test/clojure/clojure_bad_1.clj
new file mode 100644
index 00000000..c8366066
--- /dev/null
+++ b/.automation/test/clojure/clojure_bad_1.clj
@@ -0,0 +1,64 @@
+(ns foo
+  (:require
+   [clojure.string :as str]
+    ;; We're never using this namespace. Also, the namespaces aren't sorted.
+   [clojure.set :as set]))
+
+;; Here we made a typo, so the symbol is unresolved:
+(but-last [1 2 3])
+
+;; Clj-kondo knows about arities of clojure namespaces, but you can also teach
+;; it about your libraries or own namespaces
+(str/join)
+
+;; foo has an arity of 2, but we're not actually using y
+(defn foo-fn [x y]
+  ;; this do is redundant:
+  (do
+    ;; this is handy for debugging, but please remove it before pushing your code:
+    (def tmp_x x)
+    (let [y (fn [] (inc x))]
+      ;; the next let can be squashed together with the previous:
+      (let [z y]
+        ;; whoopsy, calling a local function with an incorrect number of args:
+        (y x)
+        ;; also wrong:
+        (recur)))))
+
+(letfn
+ [(f [] (h 1))
+  (h [] (f 1))])
+
+(defn- private-fn [])
+;; redefining it...
+(defn- private-fn [])
+
+(defn foo [] :foo)
+;; Type error, because foo doesn't return a number!
+(inc (foo))
+
+;; I'm tired now, let's sleep...
+;; Oops, not happening because of wrong amount of args:
+(Thread/sleep 1000 1 2)
+
+;; Here we switch to another namespace and require the previous:
+(ns bar (:require [foo :as f]))
+
+;; Wrong arity when calling a function from the previous namespace:
+(f/foo-fn)
+
+;; private:
+(f/private-fn)
+
+;; this won't pass the reader:
+{:a 1 :a 2}
+;; and neither will this:
+#{1 1}
+;; nor this:
+{:a 1 :b}
+
+(ns bar-test (:require [clojure.test :as t]))
+
+(t/deftest my-tests
+  ;; you're not actually testing something here:
+  (odd? (inc 1)))
\ No newline at end of file
diff --git a/.automation/test/clojure/clojure_good_1.clj b/.automation/test/clojure/clojure_good_1.clj
new file mode 100644
index 00000000..391f4688
--- /dev/null
+++ b/.automation/test/clojure/clojure_good_1.clj
@@ -0,0 +1,34 @@
+(ns foo
+  (:require
+   [clojure.string :as str]))
+
+(butlast [1 2 3])
+
+(str/join "" "")
+
+(defn foo-fn [x]
+    (let [y (fn [] (inc x))]
+        (y)))
+
+(letfn
+ [(f [g] (h g))
+  (h [i] (f i))])
+
+(defn foo [] 1)
+(inc (foo))
+
+(Thread/sleep 1000 1)
+
+;; Here we switch to another namespace and require the previous:
+(ns bar (:require [foo :as f]))
+
+(f/foo-fn 1)
+
+{:a 1 :b 2}
+#{1 2}
+{:a 1 :b 2}
+
+(ns bar-test (:require [clojure.test :as t]))
+
+(t/deftest my-tests
+  (t/is (odd? (inc 1))))
\ No newline at end of file
diff --git a/.automation/test/coffeescript/coffeescript_bad_1.coffee b/.automation/test/coffeescript/coffeescript_bad_1.coffee
index 5efeeacb..e388e7cc 100644
--- a/.automation/test/coffeescript/coffeescript_bad_1.coffee
+++ b/.automation/test/coffeescript/coffeescript_bad_1.coffee
@@ -6,7 +6,7 @@
 #   `mona echo *` - repeats what you say
 #
 # Author:
-#   admiralAwkbar@github.com
+#   admiralawkbar@github.com
 
 ###############################
 # Drop Hammer array of images #
diff --git a/.automation/test/coffeescript/coffeescript_good_1.coffee b/.automation/test/coffeescript/coffeescript_good_1.coffee
index 62f2a4fe..064f850e 100644
--- a/.automation/test/coffeescript/coffeescript_good_1.coffee
+++ b/.automation/test/coffeescript/coffeescript_good_1.coffee
@@ -6,7 +6,7 @@
 #   `mona echo *` - repeats what you say
 #
 # Author:
-#   admiralAwkbar@github.com
+#   admiralawkbar@github.com
 
 ###############################
 # Drop Hammer array of images #
diff --git a/.automation/test/css/css_bad_01.css b/.automation/test/css/css_bad_01.css
index 3c600b36..6ae90d7e 100644
--- a/.automation/test/css/css_bad_01.css
+++ b/.automation/test/css/css_bad_01.css
@@ -1,5 +1,5 @@
 /* Bad */
-/* Multiline */
+/* Multi-line */
 /* Comment */
 .selector-3[type="text"] {
     background: linear-gradient(#FFFFFF, rgba(0, 0, 0, 0.8));
diff --git a/.automation/test/markdown/markdown_bad_1.md b/.automation/test/markdown/markdown_bad_1.md
index 47aa18af..6599ac74 100644
--- a/.automation/test/markdown/markdown_bad_1.md
+++ b/.automation/test/markdown/markdown_bad_1.md
@@ -16,5 +16,5 @@ ls -la
 
 # Walk away
 
-Were all done **here**.
+We're all done **here**.
 - [Link Action]https://github.com
diff --git a/.automation/test/markdown/markdown_good_1.md b/.automation/test/markdown/markdown_good_1.md
index 5634a455..7a0aef45 100644
--- a/.automation/test/markdown/markdown_good_1.md
+++ b/.automation/test/markdown/markdown_good_1.md
@@ -16,5 +16,5 @@ ls -la
 
 ### Walk away
 
-Were all done **here**.
+We're all done **here**.
 - [Link Action](https://github.com)
diff --git a/.automation/test/openapi/README.md b/.automation/test/openapi/README.md
new file mode 100644
index 00000000..6f5d2c24
--- /dev/null
+++ b/.automation/test/openapi/README.md
@@ -0,0 +1,14 @@
+# OpenAPI Test Cases
+This folder holds the test cases for **OpenAPI**.  
+
+## Additional Docs
+The `_bad_` tests are valid `.yml`/`.json` but invalid OpenAPI specs.
+The test extensions used are `.ymlopenapi`/`.jsonopenapi` instead of `.yml`/`.json`. This is to prevent the [YAML] and [JSON] tests from picking them up.
+
+## Good Test Cases
+The test cases denoted: `LANGUAGE_good_FILE.EXTENSION` are all valid, and should pass successfully when linted.
+- **Note:** They are linted utilizing the default linter rules.
+
+## Bad Test Cases
+The test cases denoted: `LANGUAGE_bad_FILE.EXTENSION` are **NOT** valid, and should trigger errors when linted.
+- **Note:** They are linted utilizing the default linter rules.
diff --git a/.automation/test/openapi/openapi_bad_1.ymlopenapi b/.automation/test/openapi/openapi_bad_1.ymlopenapi
new file mode 100644
index 00000000..6c86b1b4
--- /dev/null
+++ b/.automation/test/openapi/openapi_bad_1.ymlopenapi
@@ -0,0 +1 @@
+openapi: '3.0.0'
diff --git a/.automation/test/openapi/openapi_bad_2.jsonopenapi b/.automation/test/openapi/openapi_bad_2.jsonopenapi
new file mode 100644
index 00000000..b0b97ddb
--- /dev/null
+++ b/.automation/test/openapi/openapi_bad_2.jsonopenapi
@@ -0,0 +1,3 @@
+{
+  "openapi": "3.0.0"
+}
diff --git a/.automation/test/openapi/openapi_good_1.ymlopenapi b/.automation/test/openapi/openapi_good_1.ymlopenapi
new file mode 100644
index 00000000..eb4924a1
--- /dev/null
+++ b/.automation/test/openapi/openapi_good_1.ymlopenapi
@@ -0,0 +1,13 @@
+openapi: 3.0.0
+info:
+  title: Example
+  version: '1.0'
+  contact:
+    name: Justin Kalland
+    email: justin@kalland.com
+  description: Test for super-linter
+servers:
+  - url: 'http://localhost:3000'
+paths: {}
+tags:
+  - name: example
diff --git a/.automation/test/openapi/openapi_good_2.jsonopenapi b/.automation/test/openapi/openapi_good_2.jsonopenapi
new file mode 100644
index 00000000..93f59635
--- /dev/null
+++ b/.automation/test/openapi/openapi_good_2.jsonopenapi
@@ -0,0 +1,23 @@
+{
+  "openapi": "3.0.0",
+  "info": {
+    "title": "Example",
+    "version": "1.0",
+    "contact": {
+      "name": "Justin Kalland",
+      "email": "justin@kalland.com"
+    },
+    "description": "Test for super-linter"
+  },
+  "servers": [
+    {
+      "url": "http://localhost:3000"
+    }
+  ],
+  "paths": {},
+  "tags": [
+    {
+      "name": "example"
+    }
+  ]
+}
diff --git a/.automation/test/perl/perl_bad_1.pl b/.automation/test/perl/perl_bad_1.pl
index e3626f88..7b127b99 100644
--- a/.automation/test/perl/perl_bad_1.pl
+++ b/.automation/test/perl/perl_bad_1.pl
@@ -1,7 +1,7 @@
 #!/usr/bin/perl
 ################################################################################
 ################################################################################
-######### Script action @admiralAwkbar #########################################
+######### Script action @admiralawkbar #########################################
 ################################################################################
 
 #############
diff --git a/.automation/test/perl/perl_good_1.pl b/.automation/test/perl/perl_good_1.pl
index f35c1409..caca0994 100644
--- a/.automation/test/perl/perl_good_1.pl
+++ b/.automation/test/perl/perl_good_1.pl
@@ -1,7 +1,7 @@
 #!/usr/bin/perl
 ################################################################################
 ################################################################################
-######### Script action @admiralAwkbar #########################################
+######### Script action @admiralawkbar #########################################
 ################################################################################
 
 #############
diff --git a/.automation/test/shell/shell_bad_1.sh b/.automation/test/shell/shell_bad_1.sh
index 041c57ae..aa2a95e7 100644
--- a/.automation/test/shell/shell_bad_1.sh
+++ b/.automation/test/shell/shell_bad_1.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 # CMD
 HELLO_WORLD=($(echo "Hello World" | cut -f1 -d' ' 2>&1))
diff --git a/.automation/test/shell/shell_good_1.sh b/.automation/test/shell/shell_good_1.sh
index 66430423..9a1f5bc5 100644
--- a/.automation/test/shell/shell_good_1.sh
+++ b/.automation/test/shell/shell_good_1.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 # CMD
 HELLO_WORLD=$(echo "Hello World" | cut -f1 -d' ' 2>&1)
diff --git a/.automation/upload-docker.sh b/.automation/upload-docker.sh
index c41adb33..12c15635 100755
--- a/.automation/upload-docker.sh
+++ b/.automation/upload-docker.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 ################################################################################
 ############# Deploy Container to DockerHub @admiralawkbar #####################
@@ -9,7 +9,7 @@
 # Its based on being built from a GitHub Action, but could be easily updated
 # To be ran in a different medium.
 #
-# PRE-Reqs:
+# PRE-Requirements:
 # - Dockerfile
 # - System with Docker installed
 # - Global variables met
@@ -20,6 +20,9 @@
 GITHUB_WORKSPACE="${GITHUB_WORKSPACE}"  # GitHub Workspace
 DOCKER_USERNAME="${DOCKER_USERNAME}"    # Username to login to DockerHub
 DOCKER_PASSWORD="${DOCKER_PASSWORD}"    # Password to login to DockerHub
+GPR_USERNAME="${GPR_USERNAME}"          # Username to login to GitHub package registry
+GPR_TOKEN="${GPR_TOKEN}"                # Password to login to GitHub package registry
+REGISTRY="${REGISTRY}"                  # What registry to upload | <GPR> or <Docker>
 IMAGE_REPO="${IMAGE_REPO}"              # Image repo to upload the image
 IMAGE_VERSION="${IMAGE_VERSION}"        # Version to tag the image
 DOCKERFILE_PATH="${DOCKERFILE_PATH}"    # Path to the Dockerfile to be uploaded
@@ -33,7 +36,7 @@ Header()
 {
   echo ""
   echo "-------------------------------------------------------"
-  echo "------ GitHub Actions Upload image to DockerHub -------"
+  echo "---- GitHub Actions Upload image to [$REGISTRY] ----"
   echo "-------------------------------------------------------"
   echo ""
 }
@@ -51,9 +54,9 @@ ValidateInput()
   echo "----------------------------------------------"
   echo ""
 
-  ############################
+  #############################
   # Validate GITHUB_WORKSPACE #
-  ############################
+  #############################
   if [ -z "$GITHUB_WORKSPACE" ]; then
     echo "ERROR! Failed to get [GITHUB_WORKSPACE]!"
     echo "ERROR:[$GITHUB_WORKSPACE]"
@@ -62,28 +65,77 @@ ValidateInput()
     echo "Successfully found:[GITHUB_WORKSPACE], value:[$GITHUB_WORKSPACE]"
   fi
 
-  ############################
-  # Validate DOCKER_USERNAME #
-  ############################
-  if [ -z "$DOCKER_USERNAME" ]; then
-    echo "ERROR! Failed to get [DOCKER_USERNAME]!"
-    echo "ERROR:[$DOCKER_USERNAME]"
+  #####################
+  # Validate REGISTRY #
+  #####################
+  if [ -z "$REGISTRY" ]; then
+    echo "ERROR! Failed to get [REGISTRY]!"
+    echo "ERROR:[$REGISTRY]"
     exit 1
   else
-    echo "Successfully found:[DOCKER_USERNAME], value:[$DOCKER_USERNAME]"
+    echo "Successfully found:[REGISTRY], value:[$REGISTRY]"
   fi
 
-  ############################
-  # Validate DOCKER_PASSWORD #
-  ############################
-  if [ -z "$DOCKER_PASSWORD" ]; then
-    echo "ERROR! Failed to get [DOCKER_PASSWORD]!"
-    echo "ERROR:[$DOCKER_PASSWORD]"
-    exit 1
+  #####################################################
+  # See if we need values for GitHub package Registry #
+  #####################################################
+  if [[ "$REGISTRY" == "GPR" ]]; then
+    #########################
+    # Validate GPR_USERNAME #
+    #########################
+    if [ -z "$GPR_USERNAME" ]; then
+      echo "ERROR! Failed to get [GPR_USERNAME]!"
+      echo "ERROR:[$GPR_USERNAME]"
+      exit 1
+    else
+      echo "Successfully found:[GPR_USERNAME], value:[$GPR_USERNAME]"
+    fi
+
+    ######################
+    # Validate GPR_TOKEN #
+    ######################
+    if [ -z "$GPR_TOKEN" ]; then
+      echo "ERROR! Failed to get [GPR_TOKEN]!"
+      echo "ERROR:[$GPR_TOKEN]"
+      exit 1
+    else
+      echo "Successfully found:[GPR_TOKEN], value:[********]"
+    fi
+  ########################################
+  # See if we need values for Ducker hub #
+  ########################################
+  elif [[ "$REGISTRY" == "Docker" ]]; then
+    ############################
+    # Validate DOCKER_USERNAME #
+    ############################
+    if [ -z "$DOCKER_USERNAME" ]; then
+      echo "ERROR! Failed to get [DOCKER_USERNAME]!"
+      echo "ERROR:[$DOCKER_USERNAME]"
+      exit 1
+    else
+      echo "Successfully found:[DOCKER_USERNAME], value:[$DOCKER_USERNAME]"
+    fi
+
+    ############################
+    # Validate DOCKER_PASSWORD #
+    ############################
+    if [ -z "$DOCKER_PASSWORD" ]; then
+      echo "ERROR! Failed to get [DOCKER_PASSWORD]!"
+      echo "ERROR:[$DOCKER_PASSWORD]"
+      exit 1
+    else
+      echo "Successfully found:[DOCKER_PASSWORD], value:[********]"
+    fi
+  ###########################################
+  # We were not passed a registry to update #
+  ###########################################
   else
-    echo "Successfully found:[DOCKER_PASSWORD], value:[********]"
+    echo "ERROR! Failed to find a valid registry!"
+    echo "Registry:[$REGISTRY]"
+    exit 1
   fi
 
+
   #######################
   # Validate IMAGE_REPO #
   #######################
@@ -93,6 +145,14 @@ ValidateInput()
     exit 1
   else
     echo "Successfully found:[IMAGE_REPO], value:[$IMAGE_REPO]"
+    ###############################################
+    # Need to see if GPR registry and update name #
+    ###############################################
+    if [[ "$REGISTRY" == "GPR" ]]; then
+      NAME="docker.pkg.github/$IMAGE_REPO"
+      IMAGE_REPO="$NAME"
+      echo "Updated [IMAGE_REPO] to:[$IMAGE_REPO] for GPR"
+    fi
   fi
 
   ##########################
@@ -146,22 +206,30 @@ ValidateInput()
   fi
 }
 ################################################################################
-#### Function LoginToDocker ####################################################
-LoginToDocker()
+#### Function Authenticate #####################################################
+Authenticate()
 {
+  ################
+  # Pull in Vars #
+  ################
+  USERNAME="$1"   # Name to auth with
+  PASSWORD="$2"   # Password to auth with
+  URL="$3"        # Url to auth towards
+  NAME="$4"       # name of the service
+
   ################
   # Print header #
   ################
   echo ""
   echo "----------------------------------------------"
-  echo "Login to DockerHub..."
+  echo "Login to $NAME..."
   echo "----------------------------------------------"
   echo ""
 
-  ######################
-  # Login to DockerHub #
-  ######################
-  LOGIN_CMD=$(docker login --username "$DOCKER_USERNAME" --password "$DOCKER_PASSWORD" 2>&1)
+  ###################
+  # Auth to service #
+  ###################
+  LOGIN_CMD=$(docker login "$URL" --username "$USERNAME" --password "$PASSWORD" 2>&1)
 
   #######################
   # Load the error code #
@@ -173,12 +241,12 @@ LoginToDocker()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # ERROR
-    echo "ERROR! Failed to authenticate to DockerHub!"
+    echo "ERROR! Failed to authenticate to $NAME!"
     echo "ERROR:[$LOGIN_CMD]"
     exit 1
   else
     # SUCCESS
-    echo "Successfully authenticated to DockerHub!"
+    echo "Successfully authenticated to $NAME!"
   fi
 }
 ################################################################################
@@ -194,7 +262,6 @@ BuildImage()
   echo "----------------------------------------------"
   echo ""
 
-
   ################################
   # Validate the DOCKERFILE_PATH #
   ################################
@@ -238,7 +305,7 @@ UploadImage()
   ################
   echo ""
   echo "----------------------------------------------"
-  echo "Uploading the DockerFile image..."
+  echo "Uploading the DockerFile image to $REGISTRY..."
   echo "----------------------------------------------"
   echo ""
 
@@ -261,7 +328,7 @@ UploadImage()
     exit 1
   else
     # SUCCESS
-    echo "Successfully Uploaded Docker image to DockerHub!"
+    echo "Successfully Uploaded Docker image to $REGISTRY!"
   fi
 
   #########################
@@ -329,16 +396,34 @@ Header
 ##################
 ValidateInput
 
-######################
-# Login to DockerHub #
-######################
-LoginToDocker
-
 ###################
 # Build the image #
 ###################
 BuildImage
 
+######################
+# Login to DockerHub #
+######################
+if [[ "$REGISTRY" == "Docker" ]]; then
+  # Authenticate "Username" "Password" "Url" "Name"
+  Authenticate "$DOCKER_USERNAME" "$DOCKER_PASSWORD" "" "Dockerhub"
+
+####################################
+# Login to GitHub Package Registry #
+####################################
+elif [[ "$REGISTRY" == "GPR" ]]; then
+  # Authenticate "Username" "Password" "Url" "Name"
+  Authenticate "$GPR_USERNAME" "$GPR_TOKEN" "https://docker.pkg.github.com" "GitHub Package Registry"
+
+else
+  #########
+  # ERROR #
+  #########
+  echo "ERROR! Registry not set correctly!"
+  echo "Registry:[$REGISTRY]"
+  exit 1
+fi
+
 ####################
 # Upload the image #
 ####################
diff --git a/.github/CONTRIBUTING.md b/.github/CONTRIBUTING.md
index e2302dd8..86d05b97 100644
--- a/.github/CONTRIBUTING.md
+++ b/.github/CONTRIBUTING.md
@@ -33,9 +33,10 @@ Draft pull requests are also welcome to get feedback early on, or if there is so
 If you are the current maintainer of this action:
 1. Update `README.md` and the wiki to reflect new version number in the example workflow file sections
 2. Draft [Release](https://help.github.com/en/github/administering-a-repository/managing-releases-in-a-repository) with a summarized changelog
-3. Publish the docker image to GitHub package registry
-4. Publish the docker image to Docker Hub
-5. Look for approval from [CODEOWNERS](https://help.github.com/en/github/creating-cloning-and-archiving-repositories/about-code-owners)
+3. Ensure you check the box for [publishing to the marketplace](https://help.github.com/en/actions/creating-actions/publishing-actions-in-github-marketplace#publishing-an-action)
+4. A GitHub Action will Publish the Docker image to GitHub Package Registry once a Release is created
+5. A GitHub Action will Publish the Docker image to Docker Hub once a Release is created
+6. Look for approval from [CODEOWNERS](https://help.github.com/en/github/creating-cloning-and-archiving-repositories/about-code-owners)
 
 ## Resources
 - [How to Contribute to Open Source](https://opensource.guide/how-to-contribute/)
diff --git a/.github/linters/.clj-kondo/config.edn b/.github/linters/.clj-kondo/config.edn
new file mode 100644
index 00000000..30cae4c6
--- /dev/null
+++ b/.github/linters/.clj-kondo/config.edn
@@ -0,0 +1,2 @@
+{:linters {:unresolved-symbol {:exclude [(compojure.api.sweet/defroutes)]}
+           :refer-all         {:exclude [clj-time.jdbc]}}}
diff --git a/.github/linters/.openapirc.yml b/.github/linters/.openapirc.yml
new file mode 100644
index 00000000..fdf641e1
--- /dev/null
+++ b/.github/linters/.openapirc.yml
@@ -0,0 +1,9 @@
+---
+
+##########################
+##########################
+## OpenAPI Linter rules ##
+##########################
+##########################
+
+extends: spectral:oas
diff --git a/.github/workflows/cleanup-DEV.yml b/.github/workflows/cleanup-DEV.yml
index 63d46c7a..53ef1f6a 100644
--- a/.github/workflows/cleanup-DEV.yml
+++ b/.github/workflows/cleanup-DEV.yml
@@ -47,7 +47,7 @@ jobs:
           # Set the Env Vars
           DOCKER_USERNAME: ${{ secrets.DOCKER_USERNAME }}
           DOCKER_PASSWORD: ${{ secrets.DOCKER_PASSWORD }}
-          IMAGE_REPO: admiralawkbar/super-linter
+          IMAGE_REPO: github/super-linter
           IMAGE_VERSION: ${{ github.event.pull_request.head.ref }}
         shell: bash
         run: .automation/cleanup-docker.sh
diff --git a/.github/workflows/deploy-DEV.yml b/.github/workflows/deploy-DEV.yml
index 4b6975d7..d9af1b44 100644
--- a/.github/workflows/deploy-DEV.yml
+++ b/.github/workflows/deploy-DEV.yml
@@ -43,13 +43,14 @@ jobs:
       #####################
       # Run Deploy script #
       #####################
-      - name: Deploy image to DockerHub
+      - name: Deploy DEV image to DockerHub
         env:
           # Set the Env Vars
           DOCKER_USERNAME: ${{ secrets.DOCKER_USERNAME }}
           DOCKER_PASSWORD: ${{ secrets.DOCKER_PASSWORD }}
           IMAGE_REPO: github/super-linter
           DOCKERFILE_PATH: Dockerfile
+          REGISTRY: Docker
         shell: bash
         run: .automation/upload-docker.sh
 
diff --git a/.github/workflows/deploy-PROD.yml b/.github/workflows/deploy-PROD.yml
index fd39563b..b2306c80 100644
--- a/.github/workflows/deploy-PROD.yml
+++ b/.github/workflows/deploy-PROD.yml
@@ -40,7 +40,7 @@ jobs:
       #####################
       # Run Deploy script #
       #####################
-      - name: Deploy image to DockerHub
+      - name: Deploy latest image to DockerHub
         env:
           # Set the Env Vars
           DOCKER_USERNAME: ${{ secrets.DOCKER_USERNAME }}
@@ -48,5 +48,6 @@ jobs:
           IMAGE_REPO: github/super-linter
           IMAGE_VERSION: latest
           DOCKERFILE_PATH: Dockerfile
+          REGISTRY: Docker
         shell: bash
         run: .automation/upload-docker.sh
diff --git a/.github/workflows/deploy-RELEASE.yml b/.github/workflows/deploy-RELEASE.yml
new file mode 100644
index 00000000..4417ed4b
--- /dev/null
+++ b/.github/workflows/deploy-RELEASE.yml
@@ -0,0 +1,68 @@
+---
+#########################
+#########################
+## Deploy Docker Image ##
+#########################
+#########################
+
+#
+# Documentation:
+# https://help.github.com/en/articles/workflow-syntax-for-github-actions
+#
+
+#######################################
+# Start the job on all push to master #
+#######################################
+on:
+  release:
+    # Want to run the automation when a release is created
+    types: ['created']
+
+###############
+# Set the Job #
+###############
+jobs:
+  build:
+    # Name the Job
+    name: Deploy Docker Image - Release
+    # Set the agent to run on
+    runs-on: ubuntu-latest
+    ##################
+    # Load all steps #
+    ##################
+    steps:
+      ##########################
+      # Checkout the code base #
+      ##########################
+      - name: Checkout Code
+        uses: actions/checkout@v2
+
+      ###################################
+      # Run Deploy script for Dockerhub #
+      ###################################
+      - name: Deploy Release image to Dockerhub
+        env:
+          # Set the Env Vars
+          DOCKER_USERNAME: ${{ secrets.DOCKER_USERNAME }}
+          DOCKER_PASSWORD: ${{ secrets.DOCKER_PASSWORD }}
+          IMAGE_REPO: github/super-linter
+          IMAGE_VERSION: ${{ github.event.release.tag_name }}
+          DOCKERFILE_PATH: Dockerfile
+          REGISTRY: Docker
+        shell: bash
+        run: .automation/upload-docker.sh
+
+      #############################
+      # Run Deploy script for GPR #
+      #############################
+      - name: Deploy Release image to GitHub Package Registry
+        env:
+          # Set the Env Vars
+          GPR_USERNAME: ${{ secrets.GPR_USERNAME }}
+          GPR_TOKEN: ${{ secrets.GPR_TOKEN }}
+          IMAGE_REPO: github/super-linter
+          IMAGE_VERSION: ${{ github.event.release.tag_name }}
+          DOCKERFILE_PATH: Dockerfile
+          REGISTRY: GPR
+        shell: bash
+        run: .automation/upload-docker.sh
diff --git a/.gitignore b/.gitignore
index 26f92ccf..df2846f3 100644
--- a/.gitignore
+++ b/.gitignore
@@ -29,7 +29,7 @@ bower_components
 # node-waf configuration
 .lock-wscript
 
-# Compiled binary addons (https://nodejs.org/api/addons.html)
+# Compiled binary add-ons (https://nodejs.org/api/addons.html)
 build/Release
 
 # Dependency directories
@@ -60,5 +60,8 @@ typings/
 # next.js build output
 .next
 
+# clj-kondo cache
+.cache
+
 # default output report
-super-linter.report
\ No newline at end of file
+super-linter.report
diff --git a/Dockerfile b/Dockerfile
index 50b13f30..ce1ee696 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -27,7 +27,7 @@ RUN apk add --no-cache \
     libxml2-utils perl \
     ruby ruby-dev ruby-bundler ruby-rdoc make \
     py3-setuptools ansible-lint \
-    go \ 
+    go \
     openjdk8-jre \
     php7 \
     ca-certificates less ncurses-terminfo-base \
@@ -72,6 +72,7 @@ RUN npm config set package-lock false \
       eslint-plugin-jest \
       stylelint \
       stylelint-config-standard \
+      @stoplight/spectral \
       && npm --no-cache install \
       markdownlint-cli \
       jsonlint prettyjson \
@@ -131,6 +132,15 @@ RUN curl -Ls "$(curl -Ls https://api.github.com/repos/terraform-linters/tflint/r
 RUN wget "https://github.com/dotenv-linter/dotenv-linter/releases/latest/download/dotenv-linter-alpine-x86_64.tar.gz" -O - -q | tar -xzf - \
     && mv "dotenv-linter" /usr/bin
 
+#####################
+# Install clj-kondo #
+#####################
+ARG CLJ_KONDO_VERSION='2020.06.12'
+RUN curl -sLO https://github.com/borkdude/clj-kondo/releases/download/v${CLJ_KONDO_VERSION}/clj-kondo-${CLJ_KONDO_VERSION}-linux-static-amd64.zip \
+    && unzip clj-kondo-${CLJ_KONDO_VERSION}-linux-static-amd64.zip \
+    && rm clj-kondo-${CLJ_KONDO_VERSION}-linux-static-amd64.zip \
+    && mv clj-kondo /usr/bin/
+
 ##################
 # Install ktlint #
 ##################
@@ -145,6 +155,7 @@ ENV GITHUB_SHA=${GITHUB_SHA} \
     GITHUB_WORKSPACE=${GITHUB_WORKSPACE} \
     DEFAULT_BRANCH=${DEFAULT_BRANCH} \
     VALIDATE_ALL_CODEBASE=${VALIDATE_ALL_CODEBASE} \
+    LINTER_RULES_PATH=${LINTER_RULES_PATH} \
     VALIDATE_YAML=${VALIDATE_YAML} \
     VALIDATE_JSON=${VALIDATE_JSON} \
     VALIDATE_XML=${VALIDATE_XML} \
@@ -165,8 +176,10 @@ ENV GITHUB_SHA=${GITHUB_SHA} \
     VALIDATE_TERRAFORM=${VALIDATE_TERRAFORM} \
     VALIDATE_CSS=${VALIDATE_CSS} \
     VALIDATE_ENV=${VALIDATE_ENV} \
+    VALIDATE_CLOJURE=${VALIDATE_CLOJURE} \
     VALIDATE_KOTLIN=${VALIDATE_KOTLIN} \
     VALIDATE_POWERSHELL=${VALIDATE_POWERSHELL} \
+    VALIDATE_OPENAPI=${VALIDATE_OPENAPI} \
     ANSIBLE_DIRECTORY=${ANSIBLE_DIRECTORY} \
     RUN_LOCAL=${RUN_LOCAL} \
     TEST_CASE_RUN=${TEST_CASE_RUN} \
diff --git a/README.md b/README.md
index db767737..6f790344 100644
--- a/README.md
+++ b/README.md
@@ -8,10 +8,26 @@ The end goal of this tool:
 - Build guidelines for code layout and format
 - Automate the process to help streamline code reviews
 
+
+## Table of Contents
+
+- [How it works](#how-it-works)
+- [Supported linters](#supported-linters)
+- [Usage](#how-to-use)
+- [Environment variables](#environment-variables)
+- [Disable rules](#disabling-rules)
+- [Docker Hub](#docker-hub)
+- [Run Super-Linter locally](#running-super-linter-locally-troubleshootingdebuggingenhancements)
+  - [CI / CT/ CD](#cictcd)
+- [Limitations](#limitations)
+- [Contributing](#how-to-contribute)
+
 ## How it Works
 
 The super-linter finds issues and reports them to the console output. Fixes are suggested in the console output but not automatically fixed, and a status check will show up as failed on the pull request.
 
+The design of the **Super-Linter** is currently to allow linting to occur in **GitHub Actions** as a part of continuous integration occurring on pull requests as the commits get pushed. It works best when commits are being pushed early and often to a branch with an open or draft pull request. There is some desire to move this closer to local development for faster feedback on linting errors but this is not yet supported.
+
 ## Supported Linters
 
 Developers on **GitHub** can call the **GitHub Action** to lint their code base with the following list of linters:
@@ -20,6 +36,7 @@ Developers on **GitHub** can call the **GitHub Action** to lint their code base
 | ---              | ---                                                                      |
 | **Ansible**      | [ansible-lint](https://github.com/ansible/ansible-lint)                  |
 | **CSS**          | [stylelint](https://stylelint.io/)                                       |
+| **Clojure**      | [clj-kondo](https://github.com/borkdude/clj-kondo)                       |
 | **CoffeeScript** | [coffeelint](https://coffeelint.github.io/)                              |
 | **Dockerfile**   | [dockerfilelint](https://github.com/replicatedhq/dockerfilelint.git)     |
 | **Golang**       | [golangci-lint](https://github.com/golangci/golangci-lint)               |
@@ -38,6 +55,7 @@ Developers on **GitHub** can call the **GitHub Action** to lint their code base
 | **PowerShell**   | [PSScriptAnalyzer](https://github.com/PowerShell/Psscriptanalyzer)       |
 | **ENV**          | [dotenv-linter](https://github.com/dotenv-linter/dotenv-linter)          |
 | **Kotlin**       | [ktlint](https://github.com/pinterest/ktlint)                            |
+| **OpenAPI**      | [spectral](https://github.com/stoplightio/spectral)                      |
 
 ## How to use
 To use this **GitHub** Action you will need to complete the following:
@@ -98,14 +116,14 @@ jobs:
       # Run Linter against code base #
       ################################
       - name: Lint Code Base
-        uses: docker://github/super-linter:v2.1.0
+        uses: docker://github/super-linter:v2.2.0
         env:
           VALIDATE_ALL_CODEBASE: false
           VALIDATE_ANSIBLE: false
 ...
 ```
 
-**NOTE:** Using the line:`uses: docker://github/super-linter:v2.1.0` will pull the image down from **DockerHub** and run the **GitHub Super-Linter**. Using the line: `uses: github/super-linter@v2.1.0` will build and compile the **GitHub Super-Linter** at build time. This can be far more costly in time...
+**NOTE:** Using the line:`uses: docker://github/super-linter:v2.2.0` will pull the image down from **DockerHub** and run the **GitHub Super-Linter**. Using the line: `uses: github/super-linter@v2.2.0` will build and compile the **GitHub Super-Linter** at build time. This can be far more costly in time...
 
 ## Environment variables
 The super-linter allows you to pass the following `ENV` variables to be able to trigger different functionality.
@@ -121,6 +139,7 @@ and won't run anything unexpected.
 | --- | --- | --- |
 | **VALIDATE_ALL_CODEBASE** | `true` | Will parse the entire repository and find all files to validate across all types. **NOTE:** When set to `false`, only **new** or **edited** files will be parsed for validation. |
 | **DEFAULT_BRANCH** | `master` | The name of the repository default branch. |
+| **LINTER_RULES_PATH** | `.github/linters` | Directory for all linter configuration rules. |
 | **VALIDATE_YAML** | `true` |Flag to enable or disable the linting process of the language. |
 | **VALIDATE_JSON** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_XML** | `true` | Flag to enable or disable the linting process of the language. |
@@ -130,11 +149,14 @@ and won't run anything unexpected.
 | **VALIDATE_PHP** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_PYTHON** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_RUBY** | `true` | Flag to enable or disable the linting process of the language. |
+| **RUBY_CONFIG_FILE** | `.ruby-lint.yml` | Filename for [rubocop configuration](https://docs.rubocop.org/rubocop/configuration.html) (ex: `.ruby-lint.yml`, `.rubocop.yml`)|
 | **VALIDATE_COFFEE** | `true` | Flag to enable or disable the linting process of the language . |
 | **VALIDATE_ANSIBLE** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_JAVASCRIPT_ES** | `true` | Flag to enable or disable the linting process of the language. (Utilizing: eslint) |
+| **JAVASCRIPT_ES_CONFIG_FILE** | `.eslintrc.yml` | Filename for [eslint configuration](https://eslint.org/docs/user-guide/configuring#configuration-file-formats) (ex: `.eslintrc.yml`, `.eslintrc.json`)|
 | **VALIDATE_JAVASCRIPT_STANDARD** | `true` | Flag to enable or disable the linting process of the language. (Utilizing: standard) |
 | **VALIDATE_TYPESCRIPT_ES** | `true` | Flag to enable or disable the linting process of the language. (Utilizing: eslint) |
+| **TYPESCRIPT_ES_CONFIG_FILE** | `.eslintrc.yml` | Filename for [eslint configuration](https://eslint.org/docs/user-guide/configuring#configuration-file-formats) (ex: `.eslintrc.yml`, `.eslintrc.json`)|
 | **VALIDATE_TYPESCRIPT_STANDARD** | `true` | Flag to enable or disable the linting process of the language. (Utilizing: standard) |
 | **VALIDATE_DOCKER** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_GO** | `true` | Flag to enable or disable the linting process of the language. |
@@ -142,7 +164,9 @@ and won't run anything unexpected.
 | **VALIDATE_TERRAFORM** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_CSS** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_ENV** | `true` | Flag to enable or disable the linting process of the language. |
+| **VALIDATE_CLOJURE** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_KOTLIN** | `true` | Flag to enable or disable the linting process of the language. |
+| **VALIDATE_OPENAPI** | `true` | Flag to enable or disable the linting process of the language. |
 | **ANSIBLE_DIRECTORY** | `/ansible` | Flag to set the root directory for Ansible file location(s). |
 | **ACTIONS_RUNNER_DEBUG** | `false` | Flag to enable additional information about the linter, versions, and additional output. |
 | **DISABLE_ERRORS** | `false` | Flag to have the linter complete with exit code 0 even if errors were detected. |
@@ -164,6 +188,8 @@ The **Docker** container that is built from this repository is located at `https
 ## Running Super-Linter locally (troubleshooting/debugging/enhancements)
 If you find that you need to run super-linter locally, you can follow the documentation at [Running super-linter locally](https://github.com/github/super-linter/blob/master/docs/run-linter-locally.md)
 
+Check out the [note](#how-it-works) in **How it Works** to understand more about the **Super-Linter** linting locally versus via continuous integration.
+
 ### CI/CT/CD
 The **Super-Linter** has *CI/CT/CD* configured utilizing **GitHub** Actions.
 - When a branch is created and code is pushed, a **GitHub** Action is triggered for building the new **Docker** container with the new codebase
diff --git a/TEMPLATES/.ansible-lint.yml b/TEMPLATES/.ansible-lint.yml
index 0007c68d..a84da4b0 100644
--- a/TEMPLATES/.ansible-lint.yml
+++ b/TEMPLATES/.ansible-lint.yml
@@ -29,9 +29,9 @@ quiet: true
 ################
 skip_list:
   - '602' # Allow compare to empty string
-  - '204' # Allow string length greater that 160 chars
+  - '204' # Allow string length greater than 160 chars
   - '301' # False positives for running command shells
-  - '303' # Allow git commands for push add, etc...
+  - '303' # Allow git commands for push, add, etc...
   - '305' # Allow use of shell when you want
   - '503' # Allow step to run like handler
 
diff --git a/TEMPLATES/.clj-kondo/config.edn b/TEMPLATES/.clj-kondo/config.edn
new file mode 100644
index 00000000..30cae4c6
--- /dev/null
+++ b/TEMPLATES/.clj-kondo/config.edn
@@ -0,0 +1,2 @@
+{:linters {:unresolved-symbol {:exclude [(compojure.api.sweet/defroutes)]}
+           :refer-all         {:exclude [clj-time.jdbc]}}}
diff --git a/TEMPLATES/.openapirc.yml b/TEMPLATES/.openapirc.yml
new file mode 100644
index 00000000..fdf641e1
--- /dev/null
+++ b/TEMPLATES/.openapirc.yml
@@ -0,0 +1,9 @@
+---
+
+##########################
+##########################
+## OpenAPI Linter rules ##
+##########################
+##########################
+
+extends: spectral:oas
diff --git a/docs/disabling-linters.md b/docs/disabling-linters.md
index 0efb4d27..408eba19 100644
--- a/docs/disabling-linters.md
+++ b/docs/disabling-linters.md
@@ -1,6 +1,6 @@
 # Disabling linters and Rules
 If you find you need to ignore certain **errors** and **warnings**, you will need to know the *format* to disable the **Super-Linter** rules.  
-Below is examples and documentation for each language and the various methods to disable.
+Below are examples and documentation for each language and the various methods to disable.
 
 ## Table of Linters
 - [Ruby](#ruby)
@@ -24,6 +24,7 @@ Below is examples and documentation for each language and the various methods to
 - [CSS](#stylelint)
 - [ENV](#dotenv-linter)
 - [Kotlin](#kotlin)
+- [OpenAPI](#openapi)
 
 <!-- toc -->
 
@@ -156,9 +157,9 @@ This line is waaaaaaaaaay too long  # yamllint disable-line
 ### Yamllint disable code block
 ```yml
 # yamllint disable rule:colons
-- Lorem       : ipsum
-  dolor       : sit amet,
-  consectetur : adipiscing elit
+- Key         : value
+  dolor       : sit,
+  foo         : bar
 # yamllint enable
 ```
 
@@ -222,9 +223,9 @@ class Foo(object):
     def meth3(self):
         """test one line disabling"""
         # no error
-        print(self.bla) # pylint: disable=no-member
+        print(self.baz) # pylint: disable=no-member
         # error
-        print(self.blop)
+        print(self.baz)
 ```
 
 ### Pylint disable entire file
@@ -607,3 +608,44 @@ import package.b.*
 
 ### ktlint disable entire file
 - There is currently **No** way to disable rules inline of the file(s)
+
+--------------------------------------------------------------------------------
+
+## OpenAPI
+- [spectral](https://github.com/stoplightio/spectral)
+
+### OpenAPI Config file
+- `.github/linters/.openapirc.yml`
+- You can add, extend, and disable rules
+- Documentation at [Spectral Custom Rulesets](https://stoplight.io/p/docs/gh/stoplightio/spectral/docs/guides/4-custom-rulesets.md)
+- File should be located at: `.github/linters/.openapirc.yml`
+
+### OpenAPI disable single line
+- There is currently **No** way to disable rules inline of the file(s)
+
+### OpenAPI disable code block
+- There is currently **No** way to disable rules inline of the file(s)
+
+### OpenAPI disable entire file
+- There is currently **No** way to disable rules inline of the file(s)
+- However, you can make [rule exceptions](https://stoplight.io/p/docs/gh/stoplightio/spectral/docs/guides/6-exceptions.md?srn=gh/stoplightio/spectral/docs/guides/6-exceptions.md) in the config for individual file(s).
+
+--------------------------------------------------------------------------------
+
+## Clojure
+- [clj-kondo](https://github.com/borkdude/clj-kondo)
+- Since clj-kondo approaches static analysis in a very Clojure way, it is advised to read the [configuration docs](https://github.com/borkdude/clj-kondo/blob/master/doc/config.md)
+
+### clj-kondo standard Config file
+- `.github/linters/.clj-kondo/config.edn`
+
+### clj-kondo disable single line
+- There is currently **No** way to disable rules in a single line
+
+### clj-kondo disable code block
+- There is currently **No** way to disable rules in a code block
+
+### clj-kondo disable entire file
+```clojure
+{:output {:exclude-files ["path/to/file"]}}
+```
diff --git a/lib/linter.sh b/lib/linter.sh
index ac5929dc..87cdffeb 100755
--- a/lib/linter.sh
+++ b/lib/linter.sh
@@ -1,9 +1,9 @@
-#!/bin/bash
+#!/usr/bin/env bash
 # shellcheck disable=SC1003,SC2016
 
 ################################################################################
 ################################################################################
-########### Super-Linter (Lint all the code) @AdmiralAwkbar ####################
+########### Super-Linter (Lint all the code) @admiralawkbar ####################
 ################################################################################
 ################################################################################
 
@@ -12,7 +12,7 @@
 ###########
 # Default Vars
 DEFAULT_RULES_LOCATION='/action/lib/.automation'                    # Default rules files location
-LINTER_PATH='.github/linters'                                       # Default linter path
+LINTER_RULES_PATH="${LINTER_RULES_PATH:-.github/linters}"           # Linter Path Directory
 # YAML Vars
 YAML_FILE_NAME='.yaml-lint.yml'                                     # Name of the file
 YAML_LINTER_RULES="$DEFAULT_RULES_LOCATION/$YAML_FILE_NAME"         # Path to the yaml lint rules
@@ -23,17 +23,17 @@ MD_LINTER_RULES="$DEFAULT_RULES_LOCATION/$MD_FILE_NAME"             # Path to th
 PYTHON_FILE_NAME='.python-lint'                                     # Name of the file
 PYTHON_LINTER_RULES="$DEFAULT_RULES_LOCATION/$PYTHON_FILE_NAME"     # Path to the python lint rules
 # Ruby Vars
-RUBY_FILE_NAME='.ruby-lint.yml'                                     # Name of the file
+RUBY_FILE_NAME="${RUBY_CONFIG_FILE:-.ruby-lint.yml}"                # Name of the file
 RUBY_LINTER_RULES="$DEFAULT_RULES_LOCATION/$RUBY_FILE_NAME"         # Path to the ruby lint rules
 # Coffee Vars
 COFFEE_FILE_NAME='.coffee-lint.json'                                  # Name of the file
-COFFEESCRIPT_LINTER_RULES="$DEFAULT_RULES_LOCATION/$COFFEE_FILE_NAME" # Path to the coffescript lint rules
+COFFEESCRIPT_LINTER_RULES="$DEFAULT_RULES_LOCATION/$COFFEE_FILE_NAME" # Path to the coffeescript lint rules
 # Javascript Vars
-JAVASCRIPT_FILE_NAME='.eslintrc.yml'                                    # Name of the file
+JAVASCRIPT_FILE_NAME="${JAVASCRIPT_ES_CONFIG_FILE:-.eslintrc.yml}"      # Name of the file
 JAVASCRIPT_LINTER_RULES="$DEFAULT_RULES_LOCATION/$JAVASCRIPT_FILE_NAME" # Path to the Javascript lint rules
 JAVASCRIPT_STANDARD_LINTER_RULES=''                                     # ENV string to pass when running js standard
 # Typescript Vars
-TYPESCRIPT_FILE_NAME='.eslintrc.yml'                                    # Name of the file
+TYPESCRIPT_FILE_NAME="${TYPESCRIPT_ES_CONFIG_FILE:-.eslintrc.yml}"      # Name of the file
 TYPESCRIPT_LINTER_RULES="$DEFAULT_RULES_LOCATION/$TYPESCRIPT_FILE_NAME" # Path to the Typescript lint rules
 TYPESCRIPT_STANDARD_LINTER_RULES=''                                     # ENV string to pass when running js standard
 # Ansible Vars
@@ -54,6 +54,12 @@ POWERSHELL_LINTER_RULES="$DEFAULT_RULES_LOCATION/$POWERSHELL_FILE_NAME"    # Pat
 # CSS Vars
 CSS_FILE_NAME='.stylelintrc.json'                                   # Name of the file
 CSS_LINTER_RULES="$DEFAULT_RULES_LOCATION/$CSS_FILE_NAME"           # Path to the CSS lint rules
+# OpenAPI Vars
+OPENAPI_FILE_NAME='.openapirc.yml'                                   # Name of the file
+OPENAPI_LINTER_RULES="$DEFAULT_RULES_LOCATION/$OPENAPI_FILE_NAME"   # Path to the OpenAPI lint rules
+# Clojure Vars
+CLOJURE_FILE_NAME='.clj-kondo/config.edn'
+CLOJURE_LINTER_RULES="$DEFAULT_RULES_LOCATION/$CLOJURE_FILE_NAME"
 
 #######################################
 # Linter array for information prints #
@@ -61,7 +67,7 @@ CSS_LINTER_RULES="$DEFAULT_RULES_LOCATION/$CSS_FILE_NAME"           # Path to th
 LINTER_ARRAY=("jsonlint" "yamllint" "xmllint" "markdownlint" "shellcheck"
   "pylint" "perl" "rubocop" "coffeelint" "eslint" "standard"
   "ansible-lint" "/dockerfilelint/bin/dockerfilelint" "golangci-lint" "tflint"
-  "stylelint" "dotenv-linter" "powershell" "ktlint")
+  "stylelint" "dotenv-linter" "powershell" "ktlint" "clj-kondo" "spectral")
 
 #############################
 # Language array for prints #
@@ -69,7 +75,7 @@ LINTER_ARRAY=("jsonlint" "yamllint" "xmllint" "markdownlint" "shellcheck"
 LANGUAGE_ARRAY=('YML' 'JSON' 'XML' 'MARKDOWN' 'BASH' 'PERL' 'PHP' 'RUBY' 'PYTHON'
   'COFFEESCRIPT' 'ANSIBLE' 'JAVASCRIPT_STANDARD' 'JAVASCRIPT_ES'
   'TYPESCRIPT_STANDARD' 'TYPESCRIPT_ES' 'DOCKER' 'GO' 'TERRAFORM'
-  'ENV' 'POWERSHELL' 'KOTLIN')
+  'CSS' 'ENV' 'POWERSHELL' 'KOTLIN' 'CLOJURE' 'OPENAPI')
 
 ###################
 # GitHub ENV Vars #
@@ -97,11 +103,13 @@ VALIDATE_TYPESCRIPT_ES="${VALIDATE_TYPESCRIPT_ES}"              # Boolean to val
 VALIDATE_TYPESCRIPT_STANDARD="${VALIDATE_TYPESCRIPT_STANDARD}"  # Boolean to validate language
 VALIDATE_DOCKER="${VALIDATE_DOCKER}"                  # Boolean to validate language
 VALIDATE_GO="${VALIDATE_GO}"                          # Boolean to validate language
-VALIDATE_TERRAFORM="${VALIDATE_TERRAFORM}"            # Boolean to validate language
-VALIDATE_POWERSHELL="${VALIDATE_POWERSHELL}"          # Boolean to validate language
 VALIDATE_CSS="${VALIDATE_CSS}"                        # Boolean to validate language
 VALIDATE_ENV="${VALIDATE_ENV}"                        # Boolean to validate language
+VALIDATE_CLOJURE="${VALIDATE_CLOJURE}"                # Boolean to validate language
+VALIDATE_TERRAFORM="${VALIDATE_TERRAFORM}"            # Boolean to validate language
+VALIDATE_POWERSHELL="${VALIDATE_POWERSHELL}"          # Boolean to validate language
 VALIDATE_KOTLIN="${VALIDATE_KOTLIN}"                  # Boolean to validate language
+VALIDATE_OPENAPI="${VALIDATE_OPENAPI}"                # Boolean to validate language
 TEST_CASE_RUN="${TEST_CASE_RUN}"                      # Boolean to validate only test cases
 DISABLE_ERRORS="${DISABLE_ERRORS}"                    # Boolean to enable warning-only output without throwing errors
 
@@ -114,16 +122,17 @@ ACTIONS_RUNNER_DEBUG="${ACTIONS_RUNNER_DEBUG}"  # Boolean to see even more info
 ################
 # Default Vars #
 ################
-DEFAULT_VALIDATE_ALL_CODEBASE='true'                  # Default value for validate all files
-DEFAULT_WORKSPACE="${DEFAULT_WORKSPACE:-/tmp/lint}"   # Default workspace if running locally
-DEFAULT_ANSIBLE_DIRECTORY="$GITHUB_WORKSPACE/ansible" # Default Ansible Directory
-DEFAULT_RUN_LOCAL='false'                             # Default value for debugging locally
-DEFAULT_TEST_CASE_RUN='false'                         # Flag to tell code to run only test cases
-DEFAULT_ACTIONS_RUNNER_DEBUG='false'                  # Default value for debugging output
-RAW_FILE_ARRAY=()                                     # Array of all files that were changed
-READ_ONLY_CHANGE_FLAG=0                               # Flag set to 1 if files changed are not txt or md
-TEST_CASE_FOLDER='.automation/test'                   # Folder for test cases we should always ignore
-DEFAULT_DISABLE_ERRORS='false'                        # Default to enabling errors
+DEFAULT_VALIDATE_ALL_CODEBASE='true'                    # Default value for validate all files
+DEFAULT_WORKSPACE="${DEFAULT_WORKSPACE:-/tmp/lint}"     # Default workspace if running locally
+DEFAULT_ANSIBLE_DIRECTORY="$GITHUB_WORKSPACE/ansible"   # Default Ansible Directory
+DEFAULT_RUN_LOCAL='false'             # Default value for debugging locally
+DEFAULT_TEST_CASE_RUN='false'         # Flag to tell code to run only test cases
+DEFAULT_ACTIONS_RUNNER_DEBUG='false'  # Default value for debugging output
+RAW_FILE_ARRAY=()                     # Array of all files that were changed
+READ_ONLY_CHANGE_FLAG=0               # Flag set to 1 if files changed are not txt or md
+TEST_CASE_FOLDER='.automation/test'   # Folder for test cases we should always ignore
+DEFAULT_DISABLE_ERRORS='false'        # Default to enabling errors
+DEFAULT_IFS="$IFS"                    # Get the Default IFS for updating
 
 ##############
 # Format     #
@@ -152,10 +161,12 @@ FILE_ARRAY_TYPESCRIPT_STANDARD=()   # Array of files to check
 FILE_ARRAY_DOCKER=()                # Array of files to check
 FILE_ARRAY_GO=()                    # Array of files to check
 FILE_ARRAY_TERRAFORM=()             # Array of files to check
-FILE_ARRAY_POWERSHELL=()             # Array of files to check
+FILE_ARRAY_POWERSHELL=()            # Array of files to check
 FILE_ARRAY_CSS=()                   # Array of files to check
 FILE_ARRAY_ENV=()                   # Array of files to check
+FILE_ARRAY_CLOJURE=()               # Array of files to check
 FILE_ARRAY_KOTLIN=()                # Array of files to check
+FILE_ARRAY_OPENAPI=()               # Array of files to check
 
 ############
 # Counters #
@@ -181,7 +192,9 @@ ERRORS_FOUND_TERRAFORM=0            # Count of errors found
 ERRORS_FOUND_POWERSHELL=0           # Count of errors found
 ERRORS_FOUND_CSS=0                  # Count of errors found
 ERRORS_FOUND_ENV=0                  # Count of errors found
+ERRORS_FOUND_CLOJURE=0              # Count of errors found
 ERRORS_FOUND_KOTLIN=0               # Count of errors found
+ERRORS_FOUND_OPENAPI=0              # Count of errors found
 
 ################################################################################
 ########################## FUNCTIONS BELOW #####################################
@@ -269,14 +282,14 @@ GetLinterRules()
   #####################################
   # Validate we have the linter rules #
   #####################################
-  if [ -f "$GITHUB_WORKSPACE/$LINTER_PATH/$FILE_NAME" ]; then
+  if [ -f "$GITHUB_WORKSPACE/$LINTER_RULES_PATH/$FILE_NAME" ]; then
     echo "----------------------------------------------"
     echo "User provided file:[$FILE_NAME], setting rules file..."
 
     ####################################
     # Copy users into default location #
     ####################################
-    CP_CMD=$(cp "$GITHUB_WORKSPACE/$LINTER_PATH/$FILE_NAME" "$FILE_LOCATION" 2>&1)
+    CP_CMD=$(cp "$GITHUB_WORKSPACE/$LINTER_RULES_PATH/$FILE_NAME" "$FILE_LOCATION" 2>&1)
 
     ###################
     # Load Error code #
@@ -296,7 +309,7 @@ GetLinterRules()
     # No user default provided, using the template default #
     ########################################################
     if [[ "$ACTIONS_RUNNER_DEBUG" == "true" ]]; then
-      echo "  -> Codebase does NOT have file:[$LINTER_PATH/$FILE_NAME], using Default rules at:[$FILE_LOCATION]"
+      echo "  -> Codebase does NOT have file:[$LINTER_RULES_PATH/$FILE_NAME], using Default rules at:[$FILE_LOCATION]"
     fi
   fi
 }
@@ -602,6 +615,42 @@ LintAnsibleFiles()
     fi
   fi
 }
+
+################################################################################
+#### Function DetectOpenAPIFile ################################################
+DetectOpenAPIFile()
+{
+  ################
+  # Pull in vars #
+  ################
+  FILE="$1"
+
+  ###############################
+  # Check the file for keywords #
+  ###############################
+  grep -E '"openapi":|"swagger":|^openapi:|^swagger:' "$GITHUB_WORKSPACE/$FILE" > /dev/null
+
+  #######################
+  # Load the error code #
+  #######################
+  ERROR_CODE=$?
+
+  ##############################
+  # Check the shell for errors #
+  ##############################
+  if [ $ERROR_CODE -eq 0 ]; then
+    ########################
+    # Found string in file #
+    ########################
+	  return 0
+  else
+    ###################
+    # No string match #
+    ###################
+	  return 1
+  fi
+}
+
 ################################################################################
 #### Function GetGitHubVars ####################################################
 GetGitHubVars()
@@ -801,7 +850,9 @@ GetValidationInfo()
   VALIDATE_POWERSHELL=$(echo "$VALIDATE_POWERSHELL" | awk '{print tolower($0)}')
   VALIDATE_CSS=$(echo "$VALIDATE_CSS" | awk '{print tolower($0)}')
   VALIDATE_ENV=$(echo "$VALIDATE_ENV" | awk '{print tolower($0)}')
+  VALIDATE_CLOJURE=$(echo "$VALIDATE_CLOJURE" | awk '{print tolower($0)')
   VALIDATE_KOTLIN=$(echo "$VALIDATE_KOTLIN" | awk '{print tolower($0)}')
+  VALIDATE_OPENAPI=$(echo "$VALIDATE_OPENAPI" | awk '{print tolower($0)}')
 
   ################################################
   # Determine if any linters were explicitly set #
@@ -828,6 +879,8 @@ GetValidationInfo()
         -n "$VALIDATE_POWERSHELL" || \
         -n "$VALIDATE_CSS" || \
         -n "$VALIDATE_ENV" || \
+        -n "$VALIDATE_CLOJURE" || \
+        -n "$VALIDATE_OPENAPI" || \
         -n "$VALIDATE_KOTLIN" ]]; then
     ANY_SET="true"
   fi
@@ -1140,6 +1193,33 @@ GetValidationInfo()
     VALIDATE_KOTLIN="true"
   fi
 
+  #######################################
+  # Validate if we should check OPENAPI #
+  #######################################
+  if [[ "$ANY_SET" == "true" ]]; then
+    # Some linter flags were set - only run those set to true
+    if [[ -z "$VALIDATE_OPENAPI" ]]; then
+      # OPENAPI flag was not set - default to false
+      VALIDATE_OPENAPI="false"
+    fi
+  else
+    # No linter flags were set - default all to true
+    VALIDATE_OPENAPI="true"
+  fi
+
+  #######################################
+  # Validate if we should check Clojure #
+  #######################################
+  if [[ "$ANY_SET" == "true" ]]; then
+    # Some linter flags were set - only run those set to true
+    if [[ -z "$VALIDATE_CLOJURE" ]]; then
+      # Clojure flag was not set - default to false
+      VALIDATE_CLOJURE="false"
+    fi
+  else
+    # No linter flags were set - default all to true
+    VALIDATE_CLOJURE="true"
+  fi
 
   #######################################
   # Print which linters we are enabling #
@@ -1244,6 +1324,11 @@ GetValidationInfo()
   else
     PRINT_ARRAY+=("- Excluding [CSS] files in code base...")
   fi
+  if [[ "$VALIDATE_CLOJURE" == "true" ]]; then
+    PRINT_ARRAY+=("- Validating [CLOJURE] files in code base...")
+  else
+    PRINT_ARRAY+=("- Excluding [CLOJURE] files in code base...")
+  fi
   if [[ "$VALIDATE_ENV" == "true" ]]; then
     PRINT_ARRAY+=("- Validating [ENV] files in code base...")
   else
@@ -1254,6 +1339,11 @@ GetValidationInfo()
   else
     PRINT_ARRAY+=("- Excluding [KOTLIN] files in code base...")
   fi
+  if [[ "$VALIDATE_OPENAPI" == "true" ]]; then
+    PRINT_ARRAY+=("- Validating [OPENAPI] files in code base...")
+  else
+    PRINT_ARRAY+=("- Excluding [OPENAPI] files in code base...")
+  fi
 
   ##############################
   # Validate Ansible Directory #
@@ -1437,6 +1527,12 @@ BuildFileList()
       # Append the file to the array #
       ################################
       FILE_ARRAY_YML+=("$FILE")
+      ############################
+      # Check if file is OpenAPI #
+      ############################
+      if DetectOpenAPIFile "$FILE"; then
+        FILE_ARRAY_OPENAPI+=("$FILE")
+      fi
       ##########################################################
       # Set the READ_ONLY_CHANGE_FLAG since this could be exec #
       ##########################################################
@@ -1449,6 +1545,12 @@ BuildFileList()
       # Append the file to the array #
       ################################
       FILE_ARRAY_JSON+=("$FILE")
+      ############################
+      # Check if file is OpenAPI #
+      ############################
+      if DetectOpenAPIFile "$FILE"; then
+        FILE_ARRAY_OPENAPI+=("$FILE")
+      fi
       ##########################################################
       # Set the READ_ONLY_CHANGE_FLAG since this could be exec #
       ##########################################################
@@ -1639,6 +1741,15 @@ BuildFileList()
       # Set the READ_ONLY_CHANGE_FLAG since this could be exec #
       ##########################################################
       READ_ONLY_CHANGE_FLAG=1
+    elif [ "$FILE" == "clj" ] || [ "$FILE" == "cljs" ] || [ "$FILE" == "cljc" ] || [ "$FILE" == "edn" ]; then
+      ################################
+      # Append the file to the array #
+      ################################
+      FILE_ARRAY_CLOJURE+=("$FILE")
+      ##########################################################
+      # Set the READ_ONLY_CHANGE_FLAG since this could be exec #
+      ##########################################################
+      READ_ONLY_CHANGE_FLAG=1
     else
       ##############################################
       # Use file to see if we can parse what it is #
@@ -1792,12 +1903,22 @@ LintCodebase()
     # We have files added to array of files to check
     LIST_FILES=("${FILE_ARRAY[@]}") # Copy the array into list
   else
+    ###############################################################################
+    # Set the file seperator to newline to allow for grabbing objects with spaces #
+    ###############################################################################
+    IFS=$'\n'
+
     #################################
     # Get list of all files to lint #
     #################################
     # shellcheck disable=SC2207,SC2086
     LIST_FILES=($(cd "$GITHUB_WORKSPACE" || exit; find . -type f -regex "$FILE_EXTENSIONS" 2>&1))
 
+    ###########################
+    # Set IFS back to default #
+    ###########################
+    IFS="$DEFAULT_IFS"
+
     ############################################################
     # Set it back to empty if loaded with blanks from scanning #
     ############################################################
@@ -1883,7 +2004,7 @@ LintCodebase()
         # Lint the file with the rules #
         ################################
         # Need to append "'" to make the pwsh call syntax correct, also exit with exit code from inner subshell
-        LINT_CMD=$(cd "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER" || exit; $LINTER_COMMAND "$FILE"; exit $? 2>&1)
+        LINT_CMD=$(cd "$GITHUB_WORKSPACE" || exit; $LINTER_COMMAND "$FILE"; exit $? 2>&1)
       else
         ################################
         # Lint the file with the rules #
@@ -2003,11 +2124,21 @@ TestCodebase()
     # shellcheck disable=SC2207,SC2086,SC2010
     LIST_FILES=($(cd "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER" || exit; ls ansible/ | grep ".yml" 2>&1))
   else
+    ###############################################################################
+    # Set the file seperator to newline to allow for grabbing objects with spaces #
+    ###############################################################################
+    IFS=$'\n'
+
     #################################
     # Get list of all files to lint #
     #################################
     # shellcheck disable=SC2207,SC2086
     LIST_FILES=($(cd "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER" || exit; find . -type f -regex "$FILE_EXTENSIONS" ! -path "*./ansible*" 2>&1))
+
+    ###########################
+    # Set IFS back to default #
+    ###########################
+    IFS="$DEFAULT_IFS"
   fi
 
   ##################
@@ -2215,6 +2346,8 @@ Footer()
      [ "$ERRORS_FOUND_RUBY" -ne 0 ] || \
      [ "$ERRORS_FOUND_CSS" -ne 0 ] || \
      [ "$ERRORS_FOUND_ENV" -ne 0 ] || \
+     [ "$ERRORS_FOUND_OPENAPI" -ne 0 ] || \
+     [ "$ERRORS_FOUND_CLOJURE" -ne 0 ] || \
      [ "$ERRORS_FOUND_KOTLIN" -ne 0 ]; then
     # Failed exit
     echo "Exiting with errors found!"
@@ -2270,13 +2403,15 @@ RunTestCases()
   TestCodebase "JAVASCRIPT_STANDARD" "standard" "standard $JAVASCRIPT_STANDARD_LINTER_RULES" ".*\.\(js\)\$"
   TestCodebase "TYPESCRIPT_ES" "eslint" "eslint --no-eslintrc -c $TYPESCRIPT_LINTER_RULES" ".*\.\(ts\)\$"
   TestCodebase "TYPESCRIPT_STANDARD" "standard" "standard --parser @typescript-eslint/parser --plugin @typescript-eslint/eslint-plugin $TYPESCRIPT_STANDARD_LINTER_RULES" ".*\.\(ts\)\$"
-  TestCodebase "DOCKER" "/dockerfilelint/bin/dockerfilelint" "/dockerfilelint/bin/dockerfilelint" ".*\(Dockerfile\)\$"
+  TestCodebase "DOCKER" "/dockerfilelint/bin/dockerfilelint" "/dockerfilelint/bin/dockerfilelint -c $DOCKER_LINTER_RULES" ".*\(Dockerfile\)\$"
   TestCodebase "ANSIBLE" "ansible-lint" "ansible-lint -v -c $ANSIBLE_LINTER_RULES" "ansible-lint"
   TestCodebase "TERRAFORM" "tflint" "tflint -c $TERRAFORM_LINTER_RULES" ".*\.\(tf\)\$"
   TestCodebase "POWERSHELL" "pwsh" "pwsh -c Invoke-ScriptAnalyzer -EnableExit -Settings $POWERSHELL_LINTER_RULES -Path" ".*\.\(ps1\|psm1\|psd1\|ps1xml\|pssc\|psrc\|cdxml\)\$"
   TestCodebase "CSS" "stylelint" "stylelint --config $CSS_LINTER_RULES" ".*\.\(css\)\$"
   TestCodebase "ENV" "dotenv-linter" "dotenv-linter" ".*\.\(env\)\$"
+  TestCodebase "CLOJURE" "clj-kondo" "clj-kondo --config $CLOJURE_LINTER_RULES --lint" ".*\.\(clj\|cljs\|cljc\|edn\)\$"
   TestCodebase "KOTLIN" "ktlint" "ktlint" ".*\.\(kt\|kts\)\$"
+  TestCodebase "OPENAPI" "spectral" "spectral lint -r $OPENAPI_LINTER_RULES" ".*\.\(ymlopenapi\|jsonopenapi\)\$"
 
   #################
   # Footer prints #
@@ -2626,7 +2761,21 @@ if [ "$VALIDATE_DOCKER" == "true" ]; then
   # Lint the docker files #
   #########################
   # LintCodebase "FILE_TYPE" "LINTER_NAME" "LINTER_CMD" "FILE_TYPES_REGEX" "FILE_ARRAY"
-  LintCodebase "DOCKER" "/dockerfilelint/bin/dockerfilelint" "/dockerfilelint/bin/dockerfilelint" ".*\(Dockerfile\)\$" "${FILE_ARRAY_DOCKER[@]}"
+  LintCodebase "DOCKER" "/dockerfilelint/bin/dockerfilelint" "/dockerfilelint/bin/dockerfilelint -c $DOCKER_LINTER_RULES" ".*\(Dockerfile\)\$" "${FILE_ARRAY_DOCKER[@]}"
+fi
+
+###################
+# CLOJURE LINTING #
+###################
+if [ "$VALIDATE_CLOJURE" == "true" ]; then
+  #################################
+  # Get Clojure standard rules #
+  #################################
+  GetStandardRules "clj-kondo"
+  #########################
+  # Lint the Clojure files #
+  #########################
+  LintCodebase "CLOJURE" "clj-kondo" "clj-kondo --config $CLOJURE_LINTER_RULES --lint" ".*\.\(clj\|cljs\|cljc\|edn\)\$" "${FILE_ARRAY_CLOJURE[@]}"
 fi
 
 ######################
@@ -2640,6 +2789,39 @@ if [ "$VALIDATE_POWERSHELL" == "true" ]; then
   LintCodebase "POWERSHELL" "pwsh" "pwsh -c Invoke-ScriptAnalyzer -EnableExit -Settings $POWERSHELL_LINTER_RULES -Path" ".*\.\(ps1\|psm1\|psd1\|ps1xml\|pssc\|psrc\|cdxml\)\$" "${FILE_ARRAY_POWERSHELL[@]}"
 fi
 
+###################
+# OPENAPI LINTING #
+###################
+if [ "$VALIDATE_OPENAPI" == "true" ]; then
+  # If we are validating all codebase we need to build file list because not every yml/json file is an OpenAPI file
+  if [ "$VALIDATE_ALL_CODEBASE" == "true" ]; then
+    ###############################################################################
+    # Set the file seperator to newline to allow for grabbing objects with spaces #
+    ###############################################################################
+    IFS=$'\n'
+
+    # shellcheck disable=SC2207
+    LIST_FILES=($(cd "$GITHUB_WORKSPACE" || exit; find . -type f -regex ".*\.\(yml\|yaml\|json\)\$" 2>&1))
+    for FILE in "${LIST_FILES[@]}"
+    do
+      if DetectOpenAPIFile "$FILE"; then
+        FILE_ARRAY_OPENAPI+=("$FILE")
+      fi
+    done
+
+    ###########################
+    # Set IFS back to default #
+    ###########################
+    IFS="$DEFAULT_IFS"
+  fi
+
+  ##########################
+  # Lint the OpenAPI files #
+  ##########################
+  # LintCodebase "FILE_TYPE" "LINTER_NAME" "LINTER_CMD" "FILE_TYPES_REGEX" "FILE_ARRAY"
+  LintCodebase "OPENAPI" "spectral" "spectral lint -r $OPENAPI_LINTER_RULES" "disabledfileext" "${FILE_ARRAY_OPENAPI[@]}"
+fi
+
 ##########
 # Footer #
 ##########
diff --git a/lib/possum.sh b/lib/possum.sh
index f23e60a7..dd87d952 100755
--- a/lib/possum.sh
+++ b/lib/possum.sh
@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 cat <<EOF
 --------------------------------------------------------------------------------